Check that your phone's battery has at least 90% of charging level. - Turn your phone off.
- Take out its battery, SIM card, And memory card.
- From the Extracted FlashLoader program run bfloader.exe
- Click Set Model button and selectC3782_Evan_Setting_v00_production.mdl
- Click Main Partition button.
- At the opened window click on Browse button to select C3782OPEN.ptt file from the extracted firmware BIN folder, Then click OK.
- Click CSC button.
- At the opened window click on Browse button to select C3782OPEN.ptt file from the extracted firmware CSC folder, Then click OK.
- Click START button.
- Put your phone's battery back but do not turn it on.
- Press and Hold 1 + 3 keys and connect the USB cable to it, And wait until the FlashLoader program detects the phone and then you can release the both keys.
- In case FlashLoader program does not detect it from the first time, Try it one more time by removing the battery and put it again, Then repeat the previous step.
- After the FlashLoader starts the update process don't touch the phone, And never stop the process or remove the USB cable.
- Wait for the process to be done, And the FlashLoader program will show you this message "Slot freed for new download", And the Download Status box will become green.
- Now you can disconnect USB cable from phone.
Firmwares Download Here
- From the Extracted FlashLoader program run bfloader.exe
- Click Set Model button and selectC3782_Evan_Setting_v00_production.mdl
- Click Main Partition button.
- At the opened window click on Browse button to select C3782OPEN.ptt file from the extracted firmware BIN folder, Then click OK.
- Click CSC button.
- At the opened window click on Browse button to select C3782OPEN.ptt file from the extracted firmware CSC folder, Then click OK.
- Click START button.
- Put your phone's battery back but do not turn it on.
- Press and Hold 1 + 3 keys and connect the USB cable to it, And wait until the FlashLoader program detects the phone and then you can release the both keys.
- In case FlashLoader program does not detect it from the first time, Try it one more time by removing the battery and put it again, Then repeat the previous step.
- After the FlashLoader starts the update process don't touch the phone, And never stop the process or remove the USB cable.
- Wait for the process to be done, And the FlashLoader program will show you this message "Slot freed for new download", And the Download Status box will become green.
- Now you can disconnect USB cable from phone.
Firmwares Download Here
0 Comments